How to Choose the Right Quick-Release Couplings? A Professional's Guide

Choosing quick-release couplings can seem challenging due to the wide range of products and technical requirements. In this comprehensive guide, we cover all the key factors you should consider when selecting the right quick-release couplings for your application.

What Are Quick-Release Couplings and What Are They Used For?

Quick-release couplings are mechanical components that provide a quick and safe way to connect or disconnect different hoses and pipes without tools. They typically consist of two parts:

Plug (male)
Socket (female)

Most Common Applications

1.

Compressed Air Applications

2.

Hydraulics

3.

Fluid Systems

4.

Other Applications

Quick-Release Couplings vs. Traditional Fittings - Advantages and Benefits

Quick-release couplings are available in different sizes and materials for various applications. Depending on the application, they can be equipped with valves or supplied without them.

Key Factors to Consider When Choosing Quick-Release Couplings

1.

Operating Conditions

  • Hydraulic applications: Below 350 bar
  • High-pressure applications: Up to 1500 bar
  • Cooling applications: Below 25 bar. Usually closer to 10 bar.
  • Plastic couplings: Usually below 10 bar.
  • Particular attention should be paid if the operating temperature is below -30 °C or above +120 °C. In these cases, the durability of the seal is especially important.
  • Metals withstand a wide range of temperatures well. Plastics generally have poor resistance to both extremely high and extremely low temperatures.
  • When comparing flow rates, it is important to note that different manufacturers specify flow rates differently. Generally, the flow rate is expressed in litres per minute (lpm) at a pressure drop of 1 bar. This means that if the stated flow rate is 100 lpm at a pressure drop of 1 bar, the system loses 1 bar of pressure when 100 litres of fluid per minute flow through the quick-release coupling.
  • Generally, quick-release couplings with larger physical dimensions allow for higher flow rates.
  • Flow is restricted by the shut-off valve inside the quick-release coupling. If a shut-off valve is not required, it is worth considering quick-release couplings without one, also known as straight-through couplings, such as the Hansen ST series.
Environmental Conditions (Indoor/Outdoor Use)

2.

Fluid or Medium

Make sure the quick-release couplings are suitable for the medium being used.

  • The most suitable materials for water and coolants are brass, stainless steel or plastic.
  • If the medium is a coolant, such as water-glycol, an EPDM seal is generally used.
  • The most commonly used material in hydraulic applications is steel. Stainless steel may also be an option if external conditions are challenging, such as in marine environments.
  • The seals are generally made from nitrile rubber (NBR, Buna-N) or FKM (Viton).
  • In compressed air applications, the most commonly used quick-release couplings are made from either brass or steel.
  • Consider the materials of both the quick-release coupling and its seal. Stainless steel or acid-resistant stainless steel is generally used. Plastic also offers good resistance to various chemicals.
  • The seals are generally made from EPDM or FFKM.
  • When working with demanding chemicals, we recommend contacting us to select the right coupling.

3.

Material Selection

Choose a material suitable for the intended application:

  • Steel for hydraulic applications
  • Brass for general-purpose and compressed air applications
  • Stainless steel and acid-resistant stainless steel for demanding conditions and chemicals
  • Plastic for light-duty applications and applications requiring cost-effectiveness
  • Seal materials: NBR, FKM, EPDM or FFKM, depending on the medium. See our seal selection guide for more information.

4.

Technical Features

Consider the following technical features:

  • Coupling size and flow capacity
  • Pressure drop
  • Connection and disconnection forces
  • Locking mechanism
  • Shut-off valve
  • Sulkuventtiili

Does the flow of the medium need to stop when the quick-release couplings are disconnected? The options are for both sides to close, only one side to close, or for there to be no valves at all, known as a straight-through quick-release coupling.

How to Choose the Right Quick-Release Couplings Step by Step

  • Record the operating pressure and flow rate
  • Consider the temperature of the environment and the medium
  • Check the medium being used
  • ISO Standards
    • ISO 7241-A (ISO-A) – Commonly known as a tractor quick-release coupling
      Gromelle 15000 Series
    • ISO 7241-B (ISO-B) – “Hansen Standard”
      Hansen HKP Series
    • ISO 16028 – Flat-Face / Drip-Free Quick-Release Couplings
      Gromelle FF Series
      Holmbury HQ Series
    • ISO 14541 – Screw-to-Connect Quick-Release Couplings
      Gromelle 36000 Series
    • Tema T or CEJN Nordic Range 525 Standard
      Holmbury F Series
  • Industry-Specific Standards
  • Any Special Approvals Required
  • Request technical specifications from the importer
  • Compare value for money
  • Easy connection and disconnection
  • Ease of maintenance
  • Ease of cleaning

Most Common Mistakes When Choosing Quick-Release Couplings

Summary and Checklist

Before making your final selection, make sure that:

Choosing the right quick-release couplings is a critical factor in ensuring the proper functioning of the system. Careful planning and assessment of requirements ensure that the selected quick-release couplings meet all the application’s requirements and provide reliable performance over the long term.

Have Any Questions?

Sometimes it can be difficult to find the right quick-release couplings for your application. Contact our knowledgeable sales team so we can discuss solutions that are specifically suited to your needs in more detail.

Contact us
Scroll to Top